7/8'' male 0° IDC V2A
5-pol., 0,75 - 1,5mm², 6,8 - 12,5mm
Art.No.: | 7002-78091-0000000 |
Weight: | 0.104 kg |
Country of origin: | DE |
Available
Description
Male straight
7/8" (5-pole)
IDC terminals
Connection cross section: 0.75...1.5 mm²
Stainless steel 1.4305 (V2A)
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
7/8" (5-pole)
IDC terminals
Connection cross section: 0.75...1.5 mm²
Stainless steel 1.4305 (V2A)
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
Technical Data
Electrical data | Supply
Current operating per contact max. | 10 A |
---|---|
Current phase - neutral | 230 V |
Current phase - phase | 400 V |
Installation
Connection cross section min. | 0,75 mm² |
---|---|
Connection cross section max. | 1,5 mm² |
Single wire diameter min. | 0,15 mm |
Installation | Connection
Wire insulation diameter max. | 2,8 mm |
---|---|
Tightening torque | 1,5 Nm |
Mounting set | 7/8" |
Installation | Pin assignment
Coding | A |
---|---|
No. of poles | 5 |
Device protection | Electrical
Degree of protection (EN IEC 60529) | IP65, IP67 |
---|---|
Additional condition protection degree | inserted, screwed |
Pollution Degree | 3 |
Rated surge voltage | 4 kV |
Material group (IEC 60664-1) | I |
Mechanical data | Material data
Material housing | PA |
---|---|
Locking material | Stainless steel 1.4305 (V2A) |
Mechanical data | Mounting data
Mounting method | inserted, screwed, Shaking protection |
---|---|
Clamping range min. | 6,8 mm |
Clamping range max. | 9,5 mm |
Environmental characteristics | Climatic
Operating temperature min. | -40 °C |
---|---|
Operating temperature max. | 85 °C |
Important installation notes
Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
---|---|
Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
Commercial data
ECLASS-6.0 | 27279221 |
---|---|
ECLASS-7.0 | 27440104 |
ECLASS-8.0 | 27440104 |
ECLASS-9.0 | 27440102 |
ECLASS-10.1 | 27440102 |
ECLASS-11.1 | 27440102 |
ECLASS-12.0 | 27440116 |
ETIM-5.0 | EC002635 |
customs tariff number | 85366990 |
GTIN | 4048879111461 |
Packaging unit | 1 |
Accessories
---- Connection Cable ----
---- Torque Wrench ----
---- Cable Stripper ----
---- Cable Shear ----
---- Cable Cutter ----
---- Side Cutter ----