Transformers 
Power Supply DC 
UPS-Systems / Buffer- / Redundancy Modules 
Intelligent Power Distribution 
Converters / Rectifiers 
Control Cabinet Power Outlets 
EMC Suppressors 
EMC Filters 
Safety relay 
Relay Modules 
Relays 
Optocouplers / Semiconductors 
Switches 
Active Interface Technology 
Passive Interface Technology 
Eurocard Holders / Control Modules 
Front Panel Interfaces 
Pass-through 
Hybrid Fieldbus Coupling 
Lighting Elements 
Modular cable entry systems 
Control Cabinet Interfaces 
Control Devices 
Modular Connection Systems (Modlink Vario) 
Heavy Duty Connectors (Modlink Heavy) 
With open ended wires 
Connection cables 
Y connector 
Valve Connectors 
Field-wireable 
T-coupler 
Flange Connectors 
Tool 
Bulk cable 
Adapter 
Accessories 
Cube67 
Cube20 
Cube20S 
MVK Metal 
SOLID67 
Impact67 
Impact20 
MASI 
IO-Link Devices 
Repeater PROFIBUS DP + PROFIsafe 
M8 Distribution Systems 
M12 Distribution Systems 
Wireless 
Murrelektronik-nexogate 
You might also like
Digital inputs/outputs
DIO14 DIO2 IOL2
Ethernet 10/100 Mbit/s; M12, D-coded
7/8", 4-pole, 2× max. 9 A
M12, 5-pole, A-coded
DLR (Device Level Ring)
IO-Link Master V1.12
Connection cables are in the online shop under "Connection Technology".
Housing fully potted.
DIO14 DIO2 IOL2
Ethernet 10/100 Mbit/s; M12, D-coded
7/8", 4-pole, 2× max. 9 A
M12, 5-pole, A-coded
DLR (Device Level Ring)
IO-Link Master V1.12
Connection cables are in the online shop under "Connection Technology".
Housing fully potted.
Input
| Sensor supply US | 24 V DC (EN 61131-2), max. 200 mA (M12 female), short-circuit and overload protected |
|---|---|
| Type | for 3-wire sensors or mechanical switches, PNP, IO-Link Devices |
Connections
| Fieldbus | Ethernet 10/100 Mbit/s; M12, D-coded |
|---|---|
| Sensor-system/actuator supply | 7/8", 4-pole, 2× max. 9 A |
| I/O ports | M12, 5-pole, A-coded |
General data
| Protection | IP67 |
|---|---|
| Mounting method | 2-hole screw mounting |
| Dimensions H×W×D | 42×63×225 mm |
| Temperature range | -25...+55 °C (storage temperature -40...+85 °C) |
IO-Link
| IO-Link | 2× Master |
|---|---|
| Operating modes | COM1; COM2; COM3 (automatic) |
| Transfer parameters | 32 Byte (per IO-Link port) |
| Port Class | Class B (not galvanically separated) |
| Specification | IO-Link Master V1.12 |
EtherNet/IP
| Addressing | DHCP, BOOTP or IP address by DIP switch |
|---|---|
| QC (Quick Connect) | max. 360 ms |
| Multiple connections | yes |
| CIP Sync | yes |
| Composite Test Revision | CT14 |
| DLR (Device Level Ring) | yes |
Output
| Actuator supply UA | 24 V DC (EN 61131-2), max. 9 A |
|---|---|
| Switching current per output | max. 1.6 A (short-circuit and overload protected) |
| Lamp load | 10 W |
Parameterization
| PIN 4 | Input/Output (port X0...X7); IO-Link Master (port X6, X7) |
|---|---|
| PIN 2 | Input/Output (port X0...X7); U-Actuator IO-Link Class B (port X6, X7) |
Diagnostic
| Communication status | via LED |
|---|---|
| Diagnostic via LED | per module and channel |
| Diagnostic via BUS | per module and channel |
| Monitoring - under voltage | yes |
| Monitoring - no voltage | yes |
| Short-circuit and overload | yes |
| Actuator warning | per channel via LED and BUS |
| Cable break | per IO-Link Master |
Commercial data
| country of origin | DE |
|---|---|
| customs tariff number | 85389099 |
| EAN | 4048879699921 |
| eClass | 27242604 |
| Packaging unit | 1 |
